Meet Me2, the powerful twin
Me2 is the more powerful twin of the Me1, housed in the same size chassis but with twice the power (and two nozzles!)
0-100% fog output control from your DMX/RDM device, or direct local control.
At maximum output (2.76 bar / 40 psi) Me2 uses only 2 L (0.53 US gallon) of fluid per hour.
At all output levels Me2 produces a high-quality, consistent fog as long as there is fluid and gas.
4-button LCD user interface, 3 standard USITT DMX512 channels, XLR-5 connectors, RDM compliant.
This system purges the heating module after the first heating cycle and after every emission of fog preventing residual build up and clogging.
With its two nozzles, the maximum fog output is 200 m3 (7,063 ft3) per minute.
200 m3 (7,063 ft3) per minute
2 L (0.53 US gallon) per hour at 2.76 bar/40 psi
CO2 or N2
2.68 kg (5.90 lb) per hour at 2.76 bar / 40 psi
4-button LCD user interface, 3 standard DMX512 channels, XLR-5 connectors, RDM compliant.
2.5 L (0.66 US gallon)
0.5 - 0.7 micron
8 minutes (maximum)
100 - 250 VAC, 50/60 Hz single phase
61 cm (24”)
18 cm (7”)
30 cm (12”)
16.62 kg (35 lb)
30.12 kg (64 lb) with flight case
CE certified, CSA and UL approved